Get a Quote

Vertical Turning & Facing Heavy Duty Lathe Vertical Boring Machine

Vertical Turning & Facing Heavy Duty Lathe

Special Features:

STANDARD ACCESSORIES :

  • One Ram Head on Cross Rai
  • Automatic lifting of the Cross Rail
  • Jaw chucks - 4 Nos.
  • Centralised Lubrication System
  • Thyristor centralised DC drive for stepless Table speed.
  • Antifriction material coating on main slide for smooth feed motions.
  • Fully centralised control stations.

SPECIAL ACCESSORIES :

  • Additional Ram head on Cross Rail
  • Turret head on Cross Rail
  • Threading head on Cross Rail
  • Side Ram Head
  • Grinding Head
SPECIFICATIONS
Model AMI-600 AMI-1000 AMI-1500 AMI-2000 AMI-2500 AMI-3000 AMI-4000
Size of Machine 600 mm 1000 mm 1500 mm 2000 mm 2500 mm 3000 mm 4000 mm
Diameter of job table 500 900 1300 1800 2300 2800 3800
Max. Diameter Admit 800 1050 1600 2200 2750 3250 4250
Max. Height under Cross Rail 400 600 1200 1500 1700 1800 2000
  900 (optional)
Vertical travel of turret 300 410 500 700 750 750 1000
Table speeds (Nine) low Range 32-66-120 3 To 120 RPM 3 To 120 RPM 0.75 To 30 RPM. 1.5 To 100 RPM. 1.5 TO 100 RPM. 1.5 To 100 RPM.
high Range 65-133-240 ---- ---- ---- ---- ---- ----
Main Drive Motor 2.2 Kw 2 speed 3.7 Kw 5.5 Kw 11 Kw 12 Kw 15 Kw 17.5 Kw
700/1444 RPM 1440 RPM 1440 RPM 1440 RPM 1440 RPM 1440 RPM 1440 RPM
Rapid Drive Motor 1.1 KW 1400 RPM 1.5 KW 1400 RPM 1.5 KW 1440 RPM 3.7 KW 1440 RPM 5 KW 1440 RPM 7.5 KW 1440 RPM 10KW 1440 RPM
Cross Slide elevating motor 1.5 Kw 1440 RPM 1.5 Kw 1440 RPM 2.2 KW 0.005 RPM ---- ---- ---- ----
Three feed rate are available 0.102 Per/min 0.005/01/.015 0.025 to 1MM To 40 Thou ---- ---- ----
for each Table Speed. 0.227 Per / min ---- ---- ---- ---- ---- ----
0.425 Per / min ---- ---- ---- ---- ---- ----

View Project View Gallery