Hydraulic Press Brakes - Sheet Bending Machines

Special Features:

WAD Series Press Brake

Controller: DA52s, DA58T, DA66T, S530, S630

General Features

• New EU streamlined design
• The whole frame of the press brake adopt integrated welding, and by tempering to eliminate the internal stress
• The press brake frame adopt shot blast to remove rust and sprayed with anti-rust treatment
• The frame is formed by the imported CNC three-dimensional machining center in one process, which ensures the parallelism and verticality of each mounting surface.
• The controller can control the Y1 and Y2 axes (Y1 controls the left cylinder and Y2 controls the right cylinder) to ensure the synchronous movement of the ram
• Quiet speed waiting and fast down, (about 25 decibels), low noise during pressing and return (the pressure in the hydraulic system is the closed loop control of the servo main motor)
• The main oil pump does not apply work under the drive of the servo main motor, and the energy consumption is 60% lower than that of the general CNC press brake machine
• The machine oil temperature is stable, which extending the service life of various components of the hydraulic system
• More technical innovations to ensure the quality of bending, and powerful, easy to operate
• The press brake adopt the latest high-frequency hydraulic control technology, which is faster, more efficient and more stable
• The best parameter ratio, the optimal core configuration, the performance is stable, the operation is more convenient, and the bending of various workpieces in complex shape can be realized

STANDARD COMPONENTS

• Delem DA52s, DA58T, DA66T, Esa S530, S630 controller
• 3+1 axis control (Y1, Y2, X+V)
• Grating ruler (Spanish FAGOR)
• Germany HOERBIGER/BOSCH-REXROTH proportional valve
• Germany VOITH/ECKERLE or SAEMP oil pump
• SIEMENS motor
• Ball screw & linear guide -Taiwan HIWIN/PMI
• Backgauge positioning system
• Double servo motor & servo drive
• Manual mechanical crowning (below 100T)
• Motorized crowning (above 100T)
• 180° adjustable front support arm with linear guide (below 160T)
• X,Y axis servo motor control
• Fast clamp
• JS/EMB fittings
• Amada standard punch & dies

OPTIONAL

• Hydraulic Clamp (Top & Bottom) - Wila
• Sheet Followers
• Front support arm with two linear guide
• Front light curtain
• Rear light curtain
• Front laser protection
• Air cooling system
• R axis
• Motorized Z axis
• R1, R2 axis
• Z1, Z2 axis
• X1, X2 axis

Mechanical Structure

The main mechanical structure of the press brake consists of the frame, column, ram, worktable, the main cylinder and backgauge. The main components are through finite element analysis and optimized design by 3D software to fully guarantee the structural strength and rigidity of each component.

Frame

The foundation of every ADH press brake is a solid, mono-block frame which made from high yield steel. Which means our press brakes will perform accurately and reliably year after year. We' re so confident in our frames so that we offer a 15-year warranty with our standard machines.

Controller

Our WAD series press brake can be equipped with Delem DA52s, DA58T, DA66T controller and Esa S530, S630 controller. The selection of the controller should be based on practical use and budget.

Main Motor

The motor of our press brake is adopt world famous brand "Siemens", which will not only has low noise during working of the machine but also has longer service life.

Oil Pump

Hoerbiger/Voith/ELKERLE:

• Amazing low noise, made of high strength cast iron and unique design for inner noise reduction
• Low sensitivity to oil pollution and assure of long service life

Hydraulic System

Our press brake machine uses Hoerbiger integrated hydraulic control system that limits the number of pipe connections, making it more reliable and easy for maintenance.

Electrical System

Our press brake adopt Schneider electrical components. The high quality electric parts can make the machine performing well even the electricity is not stable and customers can easily get the replacement anywhere in the world.

Backgauge

We using the Taiwan HIWIN back screw and linear to ensure the moving of X-axis with higher accuracy than using rod. And the backgauge adopt timing belt & wheel mechanism which controlled by servo motor instead of step motor. The height of the backgauge finger can be adjusted manually. Totally there're THREE pcs of backgauge fingers for positioning.

Fast Clamp

The standard equipped fast clamp will help you replace the top punch in very short time. Convenient and time-saving.

Punch & Die

The standard top punch and dual-V bottom die are specially designed for bending sheet metals. More press brake toolings can be selected as per your practical use.