Milling Machine
Milling Machines- M3, M4SA, M4, M5, M6
Special Features:
TECHNICAL DATA
|
DESCRIPTION |
M3 |
M4S(A) |
M4 |
M5 |
M6 |
|
Workbench area |
254x1270 (10x50) |
254x1270 (10x50) |
254x1270 (10x50) |
254x1370 (10x54) |
305x1370 (12x54) |
|
X axis (mm) |
800 |
800 |
800 |
900 |
785 |
|
Y axis (mm) |
380 |
380 |
405 |
405 |
405 |
|
Z axis (mm) |
370 |
370 |
390 |
390 |
500 |
|
Y axis (mm) |
Triangle â–² |
Square â– |
Square â– |
Square â– |
Square â– |
|
Z axis (mm) |
Triangle â–² |
Triangle â–² |
Square â– |
Square â– |
Square â– |
|
Spindle taper (mm) |
R8 / NT30 |
R8 / NT30 |
R8 / NT30 |
R8 / NT30 |
NT40 |
|
Spindle travel (mm) |
127 |
127 |
127 |
127 |
127 |
|
Spindle speed |
16 speeds (steps) |
16 speeds (steps) |
16 speeds (steps) |
16 speeds (steps) |
16 speeds (steps) |
|
Spindle feed (mm / rev) |
0.076 / 0.003 0.038 / 0.0015 0.203 / 0.008 |
0.076 / 0.003 0.038 / 0.0015 0.203 / 0.008 |
0.076 / 0.003 0.038 / 0.0015 0.203 / 0.008 |
0.076 / 0.003 0.038 / 0.0015 0.203 / 0.008 |
0.076 / 0.003 0.038 / 0.0015 0.203 / 0.008 |
|
Spindle low speed (rpm) |
66, 110, 175, 270, 550, 930, 1460, 2270 |
66, 110, 175, 270, 550, 930, 1460, 2270 |
66, 110, 175, 270, 550, 930, 1460, 2270 |
66, 110, 175, 270, 550, 930, 1460, 2270 |
66, 110, 175, 270, 550, 930, 1460, 2270 |
|
Spindle speed (rpm) |
132, 220, 350, 540, 1100, 1860, 2920, 4540 |
132, 220, 350, 540, 1100, 1860, 2920, 4540 |
132, 220, 350, 540, 1100, 1860, 2920, 4540 |
132, 220, 350, 540, 1100, 1860, 2920, 4540 |
132, 220, 350, 540, 1100, 1860, 2920, 4540 |
|
Number of slots * width (mm) |
3x16 |
3x16 |
3x16 |
3x16 |
3x16 |
|
T slot number spacing (mm) |
65 |
65 |
65 |
65 |
65 |
|
Voltage (v) |
380/415 |
380/415 |
380/415 |
380/415 |
380/415 |
|
Frequency (hz) |
50 |
50 |
50 |
50 |
50 |
|
Machine head motor |
3HP |
3HP |
3HP |
3HP |
5HP |
|
Cooling motor |
1 / 8HP |
1 / 8HP |
1 / 8HP |
1 / 8HP |
1 / 8HP |
Please Note:
All parameters are approx. and subject to change without prior notice