Get a Quote

Lathe Machines

Shimoga Model Heavy Duty Lathe

Special Features:

STANDARD ACCESSORIES :
  • Chuck Plate
  • Face Plate
  • Motor Pulley
  • Tool Post Key
  • Dead Centre M.T.-4
  • Spindle Sleeve
  • Set of change gear
    (Inch & Metric Thread)
  • Carrier Plate
  • Electric Motor with Motor Pulley & Fittings.
  • 4 Jaws Chuck with Chuck Plate
  • Steady Rest
  • Follow Rest
  • Instruction Manual
  • Tool Box
 EXTRA ACCESSORIES :
  • Taper Turning Attachment (To be ordered with machine)
  • Machine Lamp
  • Motorised Coolant Pump with tank assembly
  • Revolving Centre
  • Quick Change Tool Post
  • 3 Jaws True Chuck with Chuck Plate
  • Centre Height 12" instead of standard
  • Spindle Hollow 3.1/8" instead of standard

 

SPECIFICATIONS
Model AMI-0 AMI-1 AMI-2 AMI-3 AMI-4 AMI-5
Size 1500 mm 5' 2075 mm 7 2675 mm 9' 3000 mm 10' 3600 mm 12' 4800 mm 16'
Height of centre over flat bed ways 235 mm 9.1/4" 250 mm10" 250mm 10" 265 mm 10.1/2" 265 mm 10.1/2" 300 mm 12"
Max. Swing over bed 455 mm 18" 455 mm 18" 455 mm 18" 520 mm 20.1/2" 520 mm 20.1/2" 620 mm 24.1/2"
Max. Swing over cross slide 290 mm 11.1/2"

290 mm 11.1/2"

 290 mm 11.1/2" 355 mm 14" 355 mm 14" 455 mm 18"
Max. Swing in gap 775 mm 30.1/2" 775 mm 30.1/2" 775 mm 30.1/2" 839 mm 33" 839 mm 33" 939 mm 37"
Length of gap in bed ------- 305 mm 12" 305 mm 12" 380 mm 15" 380 mm 15" 375 mm 15"
Length of gap in front of face plate 200 mm 8" 200 mm 8" 200 mm 8" 290 mm 11.1/2" 290mm 11.1/2" 290mm 11.1/2"
Width of bed 324 mm 12.3/4" 324 mm 12.3/4" 324 mm 12.3/4" 324 mm 12.3/4" 324 mm 12.3/4" 324 mm 12.3/4"
Admit between centres 500 mm 20" 065 mm 3' 2" 1575 mm 5'2" 1905mm6'3" 2475 mm 8'3" 3650 mm 12"
Size of threaded spindle nose   2.15/16" dia x 6 tpl        
Diameter of whole through spindle 54 mm 2.1/8" 54 mm 2.1/8" 54 mm 2.1/8" 54 mm 2.1/8" 54 mm 2.1/8" 60 mm 2.3/8"
Power of AC motor 3 phase 440 V. 1.5 kw. 2 HP 1.5 kw. 2 HP 2.25 kw. 3 HP 2.25 kw. 3HP 2.25 kw. 3 HP 3.75 kw. 5 HP
Speed of motor (50 cycles) 1440 rpm 1440 rpm 1440 rpm 1440 rpm 1440 rpm 1440 rpm
Number of spindle speeds and range   8 (31.3 to 59.5 rpm)        
Number of feeds   19        
Taper of centre in head and IS.   Morse No. 4        
Feed range mm/spindle revol.            
Longitudinal   16-2 mm (.006"-078")        
Traverse   04-43mm (.0016" -.0188")        
Lead screw diameter and pitch   38.1 mm (1.1/2") x 4 tpi        
No. of metric threads and range   13 (1 to 6 mm pitch)        
No. of inch threads and range   19 (2 to 24 tpi)        
Approximate net weight 1000 kgs. 1250 kgs. 1450 kgs. 1810 kgs. 2010 kgs. 2500 kgs.

View Project View Gallery